Removal of Carbamazepine,Naproxen, and Trimethoprim from Water by Amberlite XAD‐7: A Kinetic Study

The adsorption kinetics of carbamazepine, naproxen, and trimethoprim in aqueous solution by Amberlite? XAD‐7 has been studied. The influence of adsorbent dose (1–3 g/L), stirring rate (80–240 rpm), pH (2–9), temperature (20–60°C), and initial concentration (25–75 ppm) on the adsorption kinetics has been analyzed. The removal efficiency in the first 2 h reaches 85% for carbamazepine, 60% for naproxen, and 70% for trimethoprim. pH appears to be the most important factor conditioning the removal of these latter solutes, whereas carbamazepine adsorption seems to be independent of the pH of the adsorptive solution. Initial concentration and operation temperature moderately influence the adsorption process. Finally, stirring rate scarcely affects the process. The experimental data have been fitted to four kinetic models, namely pseudo‐first and pseudo‐second order, intra‐particle diffusion and Bangham's. The model providing the best fit is the pseudo‐second order one. Again, pH is the factor that affects the adsorption rate in a more remarkable manner although other parameters such as temperature and stirring rate also contribute to accelerate the removal of the solutes. Under the optimal operation conditions, Amberlite? XAD‐7 exhibits a promising ability for the removal of the pharmaceuticals under study.     

Was GRB 990123 a unique optical flash?

GRB 990123 was a long, complex gamma-ray burst accompanied by an extremely bright optical flash. We find different constraints on the bulk Lorentz of this burst to be consistent with the speculation that the optical light is emission from the reverse shock component of the external shock. Motivated by this currently favoured idea, we compute the prompt reverse shock emission to be expected for bursts in which multiwavelength observations allow the physical parameters to be constrained. We find that for reasonable assumptions about the velocity of source expansion, a strong optical flash  m_V≈9  was expected from the reverse shocks, which were usually found to be mildly relativistic. The best observational prospects for detecting these prompt flashes are highlighted, along with the possible reasons for the absence of optical prompt detections in ongoing observations.     

Variation in groundwater salinity in a tidal salt marsh basin,North Inlet Estuary,South Carolina

Groundwater flow of freshwater from upland forests into salt marshes is influenced by hydrologic forces that operate over a wide range of temporal scales, including storm events, tidal fluctuations, seasonal variations in rainfall and evapotranspiration (ET). Groundwater salinity can be a useful first order indicator of the balance between these flow processes. A dipole-dipole electrical resistivity survey was conducted approximately monthly during 2005 to measure groundwater salinity across a portion of Crabhaul Creek, a tidal salt marsh basin at the boundary of the upland forest and the North Inlet marsh in South Carolina. The monthly electrical resistivity surveys were designed to provide a detailed, spatially continuous measurement of subsurface conductivity to a depth of 4 m in order to further investigate the seasonal variation in groundwater salinity. Resistivity models were corroborated by simultaneous measurements of salinity in nearby piezometers. The freshwater-brackish water interface was clearly imaged by the resistivity. Movement of this interface occurs on a timescale of months rather than a regular seasonal variation. The average salinity in the marsh basin is highest in late Summer (July–August) when ET is highest, and lowest during the Winter (November–December). The position of the brackish-freshwater interface changes, but is not well correlated to local rainfall or tidal cycles except under specific circumstances. A steady-state hydrological model correctly predicts the average position of the freshwater-brackish interface and suggests a linear relationship between the height of the water table and the location of the interface. These results suggest a complex relationship between precipitation events and groundwater flow from the forest into the marsh.     

Aggradation and carbonate accumulation of Holocene Norwegian cold‐water coral reefs

Cold‐water coral ecosystems present common carbonate factories along the Atlantic continental margins, where they can form large reef structures. There is increasing knowledge on their ecology, molecular genetics, environmental controls and threats available. However, information on their carbo‐nate production and accumulation is still very limited, even though this information is essential for their evaluation as carbonate sinks. The aim of this study is to provide high‐resolution reef aggradation and carbonate accumulation rates for Norwegian cold‐water coral reefs from various settings (sunds, inner shelf and shelf margin). Furthermore, it introduces a new approach for the evaluation of the cold‐water coral preservation within cold‐water coral deposits by computed tomography analysis. This approach allows the differentiation of various kinds of cold‐water coral deposits by their macrofossil clast size and orientation signature. The obtained results suggest that preservation of cold‐water coral frameworks in living position is favoured by high reef aggradation rates, while preservation of coral rubble prevails by moderate aggradation rates. A high degree of macrofossil fragmentation indicates condensed intervals or unconformities. The observed aggradation rates with up to 1500 cm kyr^?1 exhibit the highest rates from cold‐water coral reefs so far. Reef aggradation within the studied cores was restricted to the Early and Late Holocene. Available datings of Norwegian cold‐water corals support this age pattern for other fjords while, on the shelf, cold‐water coral ages are reported additionally from the early Middle Holocene. The obtained mean carbonate accumulation rates of up to 103 g cm^?2 kyr^?1 exceed previous estimates of cold‐water coral reefs by a factor of two to three and by almost one order of magnitude to adjacent sedimentary environments (shelf, slope and deep sea). Only fjord basins locally exhibit carbonate accumulation rates in the range of the cold‐water coral reefs. Furthermore, cold‐water coral reef carbonate accumulation rates are in the range of tropical reef carbonate accumulation rates. These results clearly suggest the importance of cold‐water coral reefs as local, maybe regional to global, carbonate sinks.     

The appraisal of surface orbital vibrators with buried geophone array for permanent reservoir monitoring

Time-lapse seismic is one of the main methods for monitoring changes in reservoir conditions caused by production or injection of fluids. One approach to time-lapse seismic is through permanent reservoir monitoring, whereby seismic sources and/or receivers are permanently deployed. Permanent reservoir monitoring can offer a more cost-effective and environmentally friendly solution than traditional campaign-based surveys that rely on temporarily deployed equipment while facilitating more frequent measurements. At the CO2CRC Otway Project, surface orbital vibrators were coupled to a buried geophone array to form a permanent reservoir monitoring system. These are fixed position seismic sources that provide both P and S waves using induction motor-driven eccentric masses. After an initial injection of CO₂ in February 2016, five months of continuous seismic data were acquired, and reflection imaging was used to assess the system performance. Analysis of the data showed the effects of weather variations on the near-surface conditions and the sweep signatures of surface orbital vibrators. Data processing flows of the continuous data was adapted from Vibroseis four-dimensional data processing flows. Ground roll proved a significant challenge to data processing. In addition, variations in the surface wave pattern were linked to major rainfall events. For the appraisal of surface orbital vibrators in imaging, a Vibroseis four-dimensional monitor survey data with similar geometry was also processed. Surface orbital vibrators are observed to be reliable sources with a potential to provide a repeatable signal, especially if the ground roll should fall outside the target window of interest. To guide future permanent reservoir monitoring applications, a repeatability analysis was performed for the various key data processing steps.     

Sub‐arctic Holocene climatic and oceanographic variability in Stjernsund,northern Norway: evidence from benthic foraminifera and stable isotopes

A high‐resolution record, covering 9.3–0.2 ka BP, from the sub‐arctic Stjernsund (70°N) was studied for benthic foraminiferal faunas and stable isotopes, revealing three informally named main phases during the Holocene. The Early‐ to Mid‐Holocene (9.3–5.0 ka BP) was characterized by the strong influence of the North Atlantic Current (NAC), which prevented the reflection of the Holocene Climatic Optimum (HCO) in the bottom‐water temperature. During the Mid‐Holocene Transition (5.0–2.5 ka BP), a turnover of benthic foraminiferal faunas occurred, Atlantic Water species decreased while Arctic‐Polar species increased, and the oxygen isotope record showed larger fluctuations. Those variations correspond to a period of global climate change, to spatially more heterogeneous benthic foraminiferal faunas in the Nordic Seas region, and to regionally diverging terrestrial temperatures. The Cool Late Holocene (2.5–0.2 ka BP) was characterized by increased abundances of Arctic‐Polar species and a steady cooling trend reflected in the oxygen isotopes. In this period, our record differs considerably from those on the SW Barents Sea shelf and locations farther south. Therefore, we argue that regional atmospheric cooling triggered the late Holocene cooling trend. Several cold episodes centred at ～8.3, ～7.8, ～6.5, ～4.9, ～3.9 and ～3.3 ka BP were identified from the benthic foraminiferal faunas and the δ¹⁸O record, which correlated with marine and atmospherically driven proxy records. This suggests that short‐term cold events may result from reduced heat advection via the NAC or from colder air temperatures.     

Ichthyoplankton spatial pattern in the inner shelf off Bahía Blanca Estuary, SW Atlantic Ocean

This study focuses on the composition, abundance and distribution of ichthyoplankton in the inner shelf area off Bahía Blanca Estuary on the SW Atlantic Ocean during late spring. Eggs and larvae of Brevoortia aurea, Engraulis anchoita, Parona signata, Sciaenidae spp. – such as Cynoscion guatucupa and Micropogonias furnieri –, and Odontesthes argentinensis were found. Species richness was low probably as a result of season and shallow depths. Ichthyoplankton abundance reached values close to 10 000 per 10 m⁻³ (eggs) and 4000 per 10 m⁻³ (larvae) and displayed a spatial distribution pattern with maximum abundance values restricted to a band parallel to the coast. Differences between egg and larval patterns, probably derived from a different displacement and hydrodynamic behavior, were observed. Egg and larvae distribution patterns were found related with spawning areas and to directly depend on salinity and mesozooplankton. The larvae distribution pattern, in particular, was found to inversely depend on particulate organic carbon. In addition, the geographic location of egg and larvae maxima strongly coincided with a saline front reported for this area in springtime, thus suggesting a direct relationship with it.     

Comparison of four numerical models for simulating seepage from salt marsh sediments

A boundary integral equation method (BIEM) model and three differently formulated finite element method (FEM) models were implemented to explore the spatial and temporal patterns in marsh pore water seepage that each generated. The BIEM model is based on the Laplace equation coupled to a dynamic free-surface condition that assumes that, as the water-table changes, the aquifer instantaneously loses or gains an amount of water equal to the change in head times the specific yield. The FEM models all implement a simplified Richards equation that allows gradual desaturation or resaturation and thus flow in both the saturated and unsaturated zones of the aquifer. Two of the FEM models are based on the governing equation for the USGS model SUTRA and thus take into account fluid and aquifer compressibility. One of these was modified to take into account the effect of tidal loading on the total stress, which is assumed to be constant in the derivation of the original version of SUTRA. The third FEM model assumes that neither the fluid or aquifer matrix is compressible so that changes in storage are due solely to changes in saturation. The unmodified SUTRA model generated instantaneous boundary fluxes that were up to two orders of magnitude greater, and spatially more uniform, than those of the other models. The FEM model without compressibility generated spatial and temporal patterns of the boundary fluxes very similar to those produced by the BIEM model. The SUTRA model with the tidal stress modification gave fluxes similar in magnitude to the BIEM and no compressibility models but with distinctly different distributions in space and time. These results indicate that accurate simulation of seepage from marsh soils is highly sensitive to aquifer compressibility and to proper formulation of the effect of tidal loading on the total stress in the aquifer. They also suggest that accurate simulation may require total stress correction not only for tidal loading but for changes in the water table as well. Finally, to aid the development of methods for the measurement of compressibility, we present a schematic, pore-scale model to illustrate the factors that may govern the compressibility of marsh soils.     

Effects of copper mine tailings disposal on littoral meiofaunal assemblages in the Atacama region of northern Chile

The effects of the disposal of copper mine tailings on the littoral meiofaunal assemblages of the Chañaral area of northern Chile were studied. Of the metals data collected, only in the case of copper was there a clear association with the tailings distribution in both the seawater and porewater samples, and it is assumed that the tailings on the beaches was the source of copper in the adjacent seawater. When compared to the reference sites, the meiofaunal assemblages at the impacted sites had significantly lower densities and taxa diversities; at the northern sites only the densities were lower. Otoplanid turbellarians were identified as characteristic of those beaches impacted by tailings. The combination of porewater copper and the amount of tailings present were identified as mostly responsible for the observed structure of the meiofaunal assemblages. It was also established that the variation in natural sediment grain size from beach to beach was not a significant factor in the observed differences in the meiofaunal assemblages. The two groups of meiofauna that proved to be most sensitive to the effects of tailings dumping were the foraminiferans and the harpacticoid copepods.